How to Installation of The Cabin Filter Ac Toyota Soluna

We will inform our readers about the installation of the cabin air filter in Toyota vehicles soluna, before we will be in a vehicle soluna identifies that basically there is no cabin air filter.

In order for the Toyota Soluna in vehicle cabin air filters are necessary steps for the placement modification cabin air filter ...

however I have tried to share the information I can to the readers of our blog, how cabin air filter installation in vehicles soluna.

1. Open Drawers and Lower Box Blower out of the car.

 
 

 
2. There are two options how to put the cabin air filter into the blower box.
     a. Cut the plastic trellis bottom (there are 3 parts)
     b. Split into 2 parts Boxes Blower and cabin air filter can be placed position.

 3. After the cut plastic trellis, cabin air filter can tuck into the blower box.
4. Tidy up the position of cabin air filter in place.

 5. Position and make sure the outside air duct door closed (shut up) and screw Hinge Door in order to move insolubility door / dead.

 6. Outside air duct holes in the lid with masking tape and a suburb in the list degan foam and Box blowers are installed cabin air filter set in pairs again.
   

 

NB: How to setup a cabin air filter there are 2 options, the option 2a and 2b.
That, when done option 2a for the cabin air filter replacement is not necessary but lg lowering Box Blower plastic trellis should be partially cut.

 
Option 2b neater process because it does not cut the plastic trellis blower box, but if in doing option 2b ... for replacement of the cabin air filter should further open / lower the blower box because the box blower should be split into 2 parts to put the cabin air filter and it should open the box also auto evaporator which must dispose of freon that was in the system .... option 2a or 2b.

Source: autorotary